Matrix-orbital LK402-25 Legacy Manual do Utilizador Página 7

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 6
1.4 Connecting to a PC
The LK402-25 connects seamlessly to a PC and it is an excellent means of testing the functionality. To
connect your display to a PC, you will require a standard RS-232 9-pin serial cable such as the one pictured
in figure 4 on the previous page, as well as a modified 5V power adapter such as the one pictured in figure 1 on
page 1.
In order to connect your display to a personal computer follow these easy instructions:
1. Plug the serial cable into the com port you wish to use.
2. Connect the modified 5V power adapter to a power lead from your PC power supply (you will have to
open your computer case).
3. Connect the serial cable to the DB-9 connector on the back of the display.
4. Connect the 5V power adapter to the 4-pin connector on the back of the display.
WARNING DO NOT use the standard floppy drive power connector,
as this will not provide you with the correct voltage and will damage the
display module.
Figure 6: PC vs Matrix Orbital Display Module Wiring
Matrix Orbital LK402-25 3
Vista de página 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 55 56

Comentários a estes Manuais

Sem comentários