Matrix-orbital LCD2041 Manual do Utilizador descarregar pdf (Página 28)

Description This command will allow you to manually set the cursor position, which

controls the text insertion point, by specifying the [col] and [row] of the

new proposed cursor position.

NOTE If the cursor position is set past the end of a line it will wrap to the beginning of

the next line.

Remembered No

5.9 Go Home

Syntax

Hexadecimal 0xFE 0x48

Decimal 254 72

ASCII 254 “H”

Description This command will return the cursor to the top left corner of the display

area, identiﬁed as row one, column one.

Remembered No

5.10 Move Cursor Back

Syntax

Hexadecimal 0xFE 0x4C

Decimal 254 76

ASCII 254 “L”

Description This command will move the cursor back one space. If this command is

sent when the cursor is at the home position the cursor will wrap to the

last row / column position if line wrap is on. Sending this command will

not effect the text displayed on the module, however any characters that

are sent will over write the current characters that are being displayed.

Remembered No

5.11 Move Cursor Forward

Syntax

Hexadecimal 0xFE 0x4D

Decimal 254 77

ASCII 254 “M”

Matrix Orbital LCD2041 24

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 54 55

Sem comentários

Matrix-orbital LCD2041 Manual do Utilizador Página 28