
Examples When the key code associated with key ’P’ (0x50) is pressed, the release
code is ’p’ (0x70). In RS-232 polled mode or via the I
2
C, the “Key
Down / Key Up” codes are used; however, the user should be careful of
timing details. If the poll rate is slower than the simulated auto-repeat it
is possible that polling for a key up code will be delayed long enough
for an unwanted key repeat to be generated.
10.8 Auto Repeat Mode Off
Syntax
Hexadecimal 0xFE 0x60
Decimal 254 96
ASCII 254 “‘”
Description This command turns auto repeat mode off. See Set Auto Repeat Mode.
Remembered No
10.9 Assign Keypad Codes
Syntax
Hexadecimal 0xFE 0xD5 [KDown] [KUp]
Decimal 254 213 [KDown] [KUp]
Parameters
Parameter Length Description
KDown 9 Key down codes
KUp 9 Key up codes
Matrix Orbital GLK19264-7T-1U 40
Comentários a estes Manuais